The printer starts cleaning the print head and the power light begins flashing. Press and hold down the Stop button for more than three seconds. Make sure that the ink light is not on and that the paper light is not flashing or on. Using the Head Cleaning utility for Mac OS XĪccessing the printer driver for Mac OS XĬlick the Head Cleaning button in the Utility dialog box.įollow the steps below to clean the print head using the printer buttons. To maintain print quality, we recommend printing a few pages on a regular basis. If print quality remains a problem after replacing the ink cartridges, contact your dealer. See Replacing an Ink Cartridge Before It Is Expended If the print quality still has not improved, at least one of your ink cartridges may be old or damaged and may need to be replaced. Then run the nozzle check again and repeat the head cleaning if necessary.

If print quality has not improved after repeating this procedure about four times, turn the printer off and wait for at least six hours.

Never turn off the printer while the power light is flashing. The power light flashes while the printer performs the cleaning cycle.

If the printer icon does not appear, refer to the following section to add the icon. Right-click the printer icon on the taskbar, then select Head Cleaning. Make sure that A4 size paper is loaded in the sheet feeder. Make sure that no error lights are flashing or on. Using the Head Cleaning utility for Windowsįollow the steps below to clean the print head using the Head Cleaning utility.

Epson l3110 self test print